Location:
Search - arm usart
Search list
Description: AT917S64,ARM处理器的程序。有中断，点灯，定时器，串口的应用。-AT917S64 ARM processor procedures. Interruption, light lamps, timers, serial applications.
Platform: |
Size: 68480 |
Author: 李军 |
Hits:
Description: AT91SAM7X系ARM系统开发功能测试程序,如果你着手用AT91SAM来进行系统开发,这是确实是个很好的资料,有了他,会助你一臂之力.本源码是ADS1.2下的源码,用于UASRT异步串口功能测试
Platform: |
Size: 956630 |
Author: 龙觊峰 |
Hits:
Description: at91sam7s64 arm的串口测试代码-at91sam7s64 arm of serial testing code
Platform: |
Size: 86016 |
Author: 程昌南 |
Hits:
Description: 没有ARM开发板如何搞开发,有了PROTEUS就可以搞定!快来学习PROTEUS哦!
此为proteus-ARM2100-USOS2.70仿真文件及原码,赶快下载学习哦!收益非浅啊!-not how ARM Development Board engaged in development projects With PROTEUS can get! Come learn PROTEUS Oh! this as proteus-AR M2100- USOS2.70 simulation files and the original code, learning quickly download! greatly benefit ah!
Platform: |
Size: 829440 |
Author: afu |
Hits:
Description: AT917S64,ARM处理器的程序。有中断，点灯，定时器，串口的应用。-AT917S64 ARM processor procedures. Interruption, light lamps, timers, serial applications.
Platform: |
Size: 68608 |
Author: 李军 |
Hits:
Description: 新型M3核ARM STM32的串口通信例程，可以向计算机发送数据和接受计算机的数据。-New M3 nuclear ARM STM32 serial communication routines, you can send data to the computer and receiving computer data.
Platform: |
Size: 118784 |
Author: 王义 |
Hits:
Description: AT91SAM7X系ARM系统开发功能测试程序,如果你着手用AT91SAM来进行系统开发,这是确实是个很好的资料,有了他,会助你一臂之力.本源码是ADS1.2下的源码,用于UASRT异步串口功能测试-ARM System Development Department AT91SAM7X functional test procedures, if you proceed with AT91SAM for systems development, this is indeed a very good information, with him will help you. ADS1.2 of the source code is under source code for UASRT asynchronous serial functional tests
Platform: |
Size: 1303552 |
Author: 龙觊峰 |
Hits:
Description: 基于cortex arm stm32f103RB的智能卡（SmartCard）程序。编译通过，推荐给开发stm32的朋友.也可以移植到其他MCU上-Cortex arm stm32f103RB-based smart card (SmartCard) procedures. Compiler passed, recommended to the development of stm32 friend. Can be transplanted to other MCU on
Platform: |
Size: 1363968 |
Author: bill |
Hits:
Description: ARM 微处理器程序 开发环境 ads1.2 usart。c-usart
Platform: |
Size: 78848 |
Author: 李宗军 |
Hits:
Description: stm32非固件库程序,通过串口4发送数据，传统ARM写法-smt32 usart
Platform: |
Size: 49152 |
Author: smt32 usart |
Hits:
Description: 采用AT91RM9200的cpu，扩展第三个串口USART，通过这个串口，测试ARM与ARM的通信。此时，系统有三个可用串口，ttyS0（RS232），ttyS1（arm与arm），ttyS2（arm与AVR）-Using AT91RM9200 the cpu, expansion of the third serial port USART, through this serial port, testing, ARM and ARM communication. At this point, the system has three available serial port, ttyS0 (RS232), ttyS1 (arm and arm), ttyS2 (arm and AVR)
Platform: |
Size: 13312 |
Author: ladeng |
Hits:
Description: * 本文件实现串口发送功能（通过重构putchar函数，调用printf；或者USART_SendData()
* 这里是一个用串口实现大量数据传输的例子，使用了DMA模块进行内存到USART的传输
每当USART的发送缓冲区空时，USART模块产生一个DMA事件，
此时DMA模块响应该事件，自动从预先定义好的发送缓冲区中拿出下一个字节送给USART
整个过程无需用户程序干预，用户只需启动DMA传输传输即可
在仿真器调试时，可以在数据传输过程中暂停运行，此时DMA模块并没有停止
串口依然发送，表明DMA传输是一个独立的过程。
同时开启接收中断，在串口中断中将数据存入缓冲区，在main主循环中处理-[NO ENGLISH]
Platform: |
Size: 3072 |
Author: yyy |
Hits:
Description: stm32f103单片机的实时时钟编程 详细测试-stm32f103 microcontroller programming real-time clock
Platform: |
Size: 459776 |
Author: 王纲 |
Hits:
Description: STM32F103 arm单片机实现串口通信 收发数据-STM32F103 arm single chip serial communication send and receive data
Platform: |
Size: 1418240 |
Author: wangxin |
Hits:
Description: this code is arm usart
Platform: |
Size: 147456 |
Author: ddddd |
Hits:
Description: ARM四串口联合收发以及PDC接受数据工程代码-ARM four serial transceivers, and the joint data projects receiving PDC code
Platform: |
Size: 159744 |
Author: hanliya |
Hits:
Description: 基于ST公司低功耗产品STM32F103ZET6的红牛ARM开发板通用异步收发器（USART）程序。-Based on ST' s low power consumption of Red Bull products STM32F103ZET6 ARM development boards Universal Asynchronous Receiver Transmitter (USART) program.
Platform: |
Size: 4812800 |
Author: mj |
Hits:
Description: 最新STM32F2xx ARM微处理器嵌入式开发之CAN module guider。-The newest ARM micro-cpu enbeded development for the stm32f2xx with the guider for CAN module development！
Platform: |
Size: 2523136 |
Author: 未印 |
Hits:
Description: arm stm32开发板上的串口实验程序，实现串口数据的接收与发送，开发环境为IAR-arm stm32 development board serial experimental procedures, Serial data reception and transmission, development environment for the IAR
Platform: |
Size: 394240 |
Author: 张小抗 |
Hits:
Description: 使用外设：串口线一跟，通过COM1连接PC
** 实验名：【B】USART_TEST
** keil MDK-ARM Standard Version：V4.22A
** 软件库(keil) Version: V2.0.1
** 固件库(ST) Version: V
*************************************/
/***********************************
** 实验现象：
1、首先进行常规配置(RCC、NVIC、GPIO)，然后配置串口1(115200baud 8位数据位 1位停止位 无奇偶校验位)
2、通过对USART1写操作，完成了向PC发送字符串的功能
3、此实验对串口的操作都是通过调用ST固件库，
** 实验说明：
1、打开超级终端，进行相同的设置
2、通过JLINK烧写程序，按下“RESET”键，可以看到PC接收到的字符串
“welcome to STM32”(using peripherals: the serial port line is a heel, and the PC is connected to the COM1
* * * experimental Name: [B] USART_TEST
* * * keil MDK-ARM Standard Version:V4.22A
* * software library (keil) Version: V2.0.1
* * firmware library (ST) Version: V
*************************************/
/***********************************
* * experimental phenomena:
1, first of all the regular configuration (RCC, NVIC, GPIO), and then the serial port 1 (115200baud 8 bit data bit, 1 bit stop bit and no parity bit)
2. By writing to USART1, the function of sending strings to PC is completed
3. The operation of this experiment on the serial port is by calling the ST firmware library.
* * the experiment shows that:
1. Open the super terminal and make the same setup
2, through the JLINK burning program, press the "RESET" key, you can see the string received by PC
Welcome to STM32)
Platform: |
Size: 653312 |
Author: 72521
|
Hits: